Ürün ayrıntıları

Ev > Ürünler >

EV Charging Connector Tester with Compliance to GB/T 18487.1-2023 GB/T 20234.1-2023 and IEC 62196-1:2022 Standards

Ürünler

elektrik güvenliği test cihazları

Ses analizatörü

Bize Ulaşın

sale1@kingpo.hk

+86-769-81627526

Şimdi iletişime geçin

EV Charging Connector Tester with Compliance to GB/T 18487.1-2023 GB/T 20234.1-2023 and IEC 62196-1:2022 Standards

Adedi:	1
fiyat:	To be quoted
Standart ambalaj:	Güvenlik karton paketi veya kontrplak kutusu
Ödeme yöntemi:	T/T

Ayrıntılı Bilgiler

Ürün Tanımı

Ayrıntılı Bilgiler

Menşe yeri

Marka adı

Kingpo

Model numarası

KP-BC011

Belge

Vurgulamak:

GB/T 18487.1-2023 EV Charging Connector Tester

GB/T 20234.1-2023 EV Charging Connector Tester

IEC 62196-1:2022 EV Charging Connector Tester

Ürün Tanımı

KP-BC011 Charging Gun Insertion/Extraction Life Tester (with solution)

Product Overview

This equipment complies with the test requirements of multiple international standards including GB/T18487.1-2023, GB/T 20234.1-2023, IEC 62196-1:2022, and IEC EN 62752-2018. It is designed for life testing and normal operation testing of disconnection capability for various types of electric vehicle charging connectors.

Equipment Functional Index Requirements

The KP-BC011 tester performs plug-in/plug-out life tests, force measurement, breaking capacity tests, and normal operation tests for charging gun bases. Key features include:

Automated immersion of samples in three different solutions (rain acid, salt water, and muddy water)
Servo motor-driven operation with PLC control system
1.5-hour power-on cycle simulation for outdoor environment testing
Computerized monitoring and data recording

Usage Environment

Parameter	Specification
Ambient Temperature	5-35℃
Ambient Humidity	85%R.H at 25℃
Atmospheric Pressure	86-106 Kpa
Environmental Conditions	Vibration-free, minimal electromagnetic interference, clean environment without corrosive substances, direct sunlight, or heat sources

Main Technical Parameters

Parameter	Specification
Drive Device	Linear module, cylinder, servo motor
Controller	15"+ industrial computer with imported PLC
Power Supply Compatibility	1.1x rated voltage, rated current (user-provided)
Test Capability	All 2p+E, 3P+E, 3P+E+N specifications; AC ≥90A or DC ≥250A; DC air cooling ≥1500V, 250A; DC liquid cooling ≥1500V, 800A
Motion Speed	0.1-0.8 m/s (adjustable to 0.8±0.1 m/s standard)
Testing Rate	≥7.5 cycles per minute (adjustable)
Insertion/Extraction Force	≥500N with digital pressure module and computer curve display
Safety Features	Earth leakage protection, overcurrent protection, overload protection, door safety protection, emergency stop switch

Panel Description

Touch screen control for parameter setting and monitoring

Directional controls for gun movement and rotation

Start/stop buttons and power switch

Emergency stop switch for immediate shutdown

USB port for peripheral connectivity

Solution tank controls for automated testing

Operation Instructions

Device Connection

Power connection: AC220V control power supply
Gas source connection: 0.4-0.6 MPa pressure required

Device Startup

Power on the device via control panel switch, then access the operating interface through the touch screen.

Parameter Setting Interface

The interface allows configuration of:

Test timing and cycle counting
Insertion/extraction stroke and force measurement
Solution soaking parameters and times
System reset functions
Alarm monitoring and display

Sample Installation

Secure gun tip in holder using fixing devices
Adjust button cylinder for proper trigger activation
Align gun mount precisely with gun tip
Finalize positioning and secure all components

Testing Procedure

The automated test sequence includes:

Immersion in rainwater acid solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in saline solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in turbid water solution (4-5 seconds) followed by drying and 10 insertion/removal cycles
1.5-hour power-on cycle
Repeat entire sequence 20 times

Note: All test parameters can be stored and retrieved for future use. The system includes comprehensive safety protections and automatic shutdown features for sample damage detection.

Etiketler:

ISO 9360-1 Tıbbi Test Cihazı,

ISO 9360-1 Anestezi Ekipmanı,

ISO 9360-1 Tıbbi Test Ekipmanı

Önerilen Ürünler

Toilet Seat Extrusion Tester with AC220V±10% Power Supply 0.5MPa Driving Air Pressure and IEC 60335-2-84 Compliance

Şimdi iletişime geçin

1728L Capacity Corrosion Test Chamber with AC220V Power Supply and Temperature Control ±1℃ for Battery Testing Equipment

Şimdi iletişime geçin

60825-1-2-12 Yüksek hassasiyetli lazer kesimi gravür işareti için lazer ekipmanları

Şimdi iletişime geçin

IEC 61010-1-2010 Madde 6.8.3 Yüksek Gerilim AC / DC Test Cihazı Veya Darbe Test Cihazı, Kombinasyon Dalga Darbe Jeneratörü

Şimdi iletişime geçin

Video

Ekran Enerji Verimliliği Testi için 8K Sinyal Üreticisi

Şimdi iletişime geçin

50-55 joule Enerji Aralığı Defib-kanıtlı ve Enerji Azaltma Testörü 4.05-4.6mS Süresi Zaman Aralığı ile

Şimdi iletişime geçin

Standartlara göre test dizisini yürütmek için yerleştirilebilir sürtünme denetleyicisi ön panel anahtarı veya isteğe bağlı bilgisayar kontrolü

Şimdi iletişime geçin

Ürün ayrıntıları

Ürünler

Akü Test Cihazları

çevre test odası

İklim testi odası

Sıcaklık Nem Odası

Lamba Başlığı Göstergesi

Test ekipmanı

IP Test Ekipmanları

IEC62368 Test Ekipmanı

Tıbbi Test Cihazları

Alev Testi Ekipmanları

Işık Test Cihazları

Fiş Soket Tester

elektrik güvenliği test cihazları

Kablo Test Cihazları

Toz Test Odası

Görüntü Ölçüm Makinesi

Elektrik Motor Test Sistemi

Ses analizatörü

EV Charging Connector Tester with Compliance to GB/T 18487.1-2023 GB/T 20234.1-2023 and IEC 62196-1:2022 Standards

Adedi:	1
fiyat:	To be quoted
Standart ambalaj:	Güvenlik karton paketi veya kontrplak kutusu
Ödeme yöntemi:	T/T

Ayrıntılı Bilgiler

Ürün Tanımı

Ayrıntılı Bilgiler

Menşe yeri

ÇİN

Marka adı

Kingpo

Model numarası

KP-BC011

Belge

EV Charging Connector Teste...ds.pdf

Min sipariş miktarı:

Fiyat:

To be quoted

Ambalaj bilgileri:

Güvenlik karton paketi veya kontrplak kutusu

Ödeme koşulları:

T/T

Vurgulamak

GB/T 18487.1-2023 EV Charging Connector Tester

GB/T 20234.1-2023 EV Charging Connector Tester

IEC 62196-1:2022 EV Charging Connector Tester

Ürün Tanımı

KP-BC011 Charging Gun Insertion/Extraction Life Tester (with solution)

Product Overview

Equipment Functional Index Requirements

The KP-BC011 tester performs plug-in/plug-out life tests, force measurement, breaking capacity tests, and normal operation tests for charging gun bases. Key features include:

Automated immersion of samples in three different solutions (rain acid, salt water, and muddy water)
Servo motor-driven operation with PLC control system
1.5-hour power-on cycle simulation for outdoor environment testing
Computerized monitoring and data recording

Usage Environment

Parameter	Specification
Ambient Temperature	5-35℃
Ambient Humidity	85%R.H at 25℃
Atmospheric Pressure	86-106 Kpa
Environmental Conditions	Vibration-free, minimal electromagnetic interference, clean environment without corrosive substances, direct sunlight, or heat sources

Main Technical Parameters

Parameter	Specification
Drive Device	Linear module, cylinder, servo motor
Controller	15"+ industrial computer with imported PLC
Power Supply Compatibility	1.1x rated voltage, rated current (user-provided)
Test Capability	All 2p+E, 3P+E, 3P+E+N specifications; AC ≥90A or DC ≥250A; DC air cooling ≥1500V, 250A; DC liquid cooling ≥1500V, 800A
Motion Speed	0.1-0.8 m/s (adjustable to 0.8±0.1 m/s standard)
Testing Rate	≥7.5 cycles per minute (adjustable)
Insertion/Extraction Force	≥500N with digital pressure module and computer curve display
Safety Features	Earth leakage protection, overcurrent protection, overload protection, door safety protection, emergency stop switch

Panel Description

Touch screen control for parameter setting and monitoring

Directional controls for gun movement and rotation

Start/stop buttons and power switch

Emergency stop switch for immediate shutdown

USB port for peripheral connectivity

Solution tank controls for automated testing

Operation Instructions

Device Connection

Power connection: AC220V control power supply
Gas source connection: 0.4-0.6 MPa pressure required

Device Startup

Power on the device via control panel switch, then access the operating interface through the touch screen.

Parameter Setting Interface

The interface allows configuration of:

Test timing and cycle counting
Insertion/extraction stroke and force measurement
Solution soaking parameters and times
System reset functions
Alarm monitoring and display

Sample Installation

Secure gun tip in holder using fixing devices
Adjust button cylinder for proper trigger activation
Align gun mount precisely with gun tip
Finalize positioning and secure all components

Testing Procedure

The automated test sequence includes:

Immersion in rainwater acid solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in saline solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in turbid water solution (4-5 seconds) followed by drying and 10 insertion/removal cycles
1.5-hour power-on cycle
Repeat entire sequence 20 times

Note: All test parameters can be stored and retrieved for future use. The system includes comprehensive safety protections and automatic shutdown features for sample damage detection.

Etiketler: